Browse Forums Building A New House 1 Jan 25, 2020 10:58 pm Hi everyone, Has anyone had any experience building in FZ on the Sydney north shore? We’ve spoken to a few fire consultants and have an idea of the additional regulations we must meet. Most project builders don’t touch this and custom builds are usually more expensive. We are not too fussy about the design, just want something built in the area we love. Any recommendation on builders or general tips are welcome. Re: Building in Flame zone Sydney north shore 2Jan 26, 2020 3:51 pm "We are not too fussy about the design"
Jiminy, if you are spending $4-5-600K building a house plus the BAL requirements I'd be more than fussy on the design! What I should have added is that if you do a search on these forums for "BAL" you will come up with a host of threads on what people have had to do to comply and what they have done to incorporate these requirements into their designs. Stewie Re: Building in Flame zone Sydney north shore 3Jan 27, 2020 11:31 pm Stewie D "We are not too fussy about the design" Jiminy, if you are spending $4-5-600K building a house plus the BAL requirements I'd be more than fussy on the design! Stewie This! I'd want to build something that is comfortable, energy efficient & suited my needs. https://www.yourhome.gov.au/passive-design Hi Everyone, One of my favourite parts of a build is when the temporary fence comes down and the home begins to reveal itself. It also means we are on the home straight… 103 372670 Yes it had a house on it. But Melbourne water only wanted something the original size of the existing house. We managed to fit a 45sq house on. 10 34410 First time building 2 storey home, is under construction (in Framing stage) in NSW. I have 3 toilets and need bidet spray in… 0 17438 |