Browse Forums Building A New House Re: 2D drawing plans to 3D model 14Jul 06, 2016 9:48 pm Quote: Nice reply.... No where does the OP mention an easy to use program.... Stop thinking, your hurting yourself... Most people on these forums asking about a CAD program are only after something that they can draw their floorplans and elevations with and do a few renders for their house, that's all. For that they want something free like Sketchup or $100 or so. To ask them to cough up $2,700 for CA premier may be a tad too rich for a one off nor the associated learning curve. Stewie Hi Chippy, no there isn't, gave it a really good look through and literally opened everything and checked all edges as well. Hence the question, just hoping someone would… 2 2501 Ask the council if there is a chance of getting build over easement exemption. Sometimes easements are unused and 24cm is not all that much. Good luck. And yes any builder… 2 14971 If there have been changes, variations, during construction then the drawings should be revised, the building permit amended and the current, as built drawings given to… 2 4802 |