Browse Forums Pools & Spas 1 Apr 01, 2012 3:22 pm Hey all, putting a pool fence in around a spa, and need to turn 45 degrees at a post twice within my design. Does anyone know if you need special panel brackets/rail flanges to allow for a 45 degree turn? I mean the bracket that is used to attach the fence panel to a post. Here's a standard bracket: http://www.diypoolfencing.com.au/produc ... =140&cID=5 Bunnings seem to have no idea. And places selling pool fencing online don't seem to have special brackets for this. Re: Brackets for turning alum pool fence 45 degrees? 2Apr 01, 2012 4:49 pm They will do 45 deg, you might need to file either inside or outside side of the bracket a little to make the panel fit well. Landscape Design & Construction http://cherub.squarespace.com/ Old Home Restoration / Renovation Cheers mate! This is exactly what I was thinking but wasn't sure if it was something I'd find on the shelf. I agree with you, fixing the brackets to the board will look… 2 6264 Building Standards; Getting It Right! When my house was built (over 7 years ago), the post brackets were done to allow for concrete porch, but they didn’t allow for the planned stone paving. I’m finally… 0 4161 DIY, Home Maintenance & Repair I mean, I install them/sell them for a living so I haven't done DIY, unless you count the first one I installed lol. (electrician by trade). Usually a 6-8 hour job for… 3 44695 |