Browse Forums Lighting + Lighting Design 1 Jul 11, 2021 10:46 am Hi everyone, Likely a stupid question but I can’t for the life of me work out how to get one of the bulbs out of this interior pendant light to replace it! The small white caps at the bottom are too small and smooth to grip properly and the caps at the top seem fixed in place and won't budge at all when I try and pry then out with a bottle opener in the small holes! Any advice would be greatly appreciated as it’s driving me nuts! Thank you! Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ The best advice is for you to get a competent building consultant to guide you through your build 7 4987 thanks, yes they are dry , thats a good idea with fish oil as sanding will be hard 4 3357 Hi - thanks for your reply. Yes I think 'Ill go for whitish with very speckly bits rather than pure white something like this. PS was actually 2008 I built the… 2 12436 |