Browse Forums Flooring & Floor Covering Re: Porter D Flooring options 11Jul 15, 2007 11:48 pm Hi penjay and seak
I have changed my mind on the flooring type altogether now after receiving some honest information from a salesperson. The flooring I was considering had a wear layer of 4mm with a gloss coating. It turns out that this coating is nowhere near as tough as what would be put down on a pollished floor, ie two-pack or polyurethane. It actually scratches fairly easily. I have found a laminate that has 25 year guarentee and just won't scratch. The supplier I went to had both types on display and gave me a sample of each with a stanely knife. The flooring with the gloss finish and wear layer could be scratched very easily, and immediately I thought of kids with toys or chairs being dragged across the floor. The laminate could not be scratched, and I put a bit more pressure on the sample to try it too. This was good enough for me, and was less that half the cost of the flooring I had first considered. This flooring uses HDF, and is not like the cheap imports that use MDF. I guess it pays to shop around and ask lots of questions. I had been sold on the dearer flooring by three other suppliers, the price range was from $41.00 - $105.00 sqm. Tony Hi there, I'm a conplete newbie to this, but I'm looking to put a floor down in my 6x9m shed. It's currently sitting on a 100mm thick concrete perimeter (dirt floor… 0 6833 Three options 1 Ask the liquidator 2 Find another PD customer and ask the source of their report 3 Pay for new report 3 13924 Howdy all. I am looking for feedback on what people would do to maximise and make an area as flat as possible. First, out the front of the house is a sloping hill, pretty… 0 20676 |