heat_crime
Dear Mr Brivis,
Just happen to catch this post I started back in 2008 about your product. Why are your customers still resorting to posting at building forums to work out how your product works? Why are the installers not trained sufficiently to install your product properly and just on the odd occasion that the installer is not up to the task, why don't you make all the documentation available for people who purchased your product?
Lets face it, you don't make things easy for people trying to use your product - I was one of them. Although my heating and cooling works fine now I do look back and reflect what it was like dealing with you and the installers and it was far from pleasant and smooth. In fact, it sucked.
So, high points for your product (knock on wood mine hasn't busted yet) but minus several hundred for your company's ethos. You are a long way from the standard of your shiny brochures.
HC
Just happen to catch this post I started back in 2008 about your product. Why are your customers still resorting to posting at building forums to work out how your product works? Why are the installers not trained sufficiently to install your product properly and just on the odd occasion that the installer is not up to the task, why don't you make all the documentation available for people who purchased your product?
Lets face it, you don't make things easy for people trying to use your product - I was one of them. Although my heating and cooling works fine now I do look back and reflect what it was like dealing with you and the installers and it was far from pleasant and smooth. In fact, it sucked.
So, high points for your product (knock on wood mine hasn't busted yet) but minus several hundred for your company's ethos. You are a long way from the standard of your shiny brochures.
HC
Hi HC,
I wonder if you're able to tell us how did they sort out your problem? or would you mind telling us what sort of parameters need to be changed to get it to work?
I followed giarc suggest and changed those setting but just like he said it doesn't change the fact that the actual temp is still being read only by the master networker, and I think it actually make it worse after changing the setting, I am not sure may be I just got confused.
There is one thing I notice after following giarc's setting is that the zone indicators no longer pulse (i.e Solid) when a zone is closed. eg, when I turn both zones on, set the desired temp, the air-con starts running, if one zone B reaches the set temp, it closes that zone, and zone B indicator pulses.
now it doesn't do this anymore, I am pretty sure it does in heating mode, or am I just seeing things?