Browse Forums Pools & Spas 1 Apr 17, 2013 11:26 am Building the Riva by Dale Alcock Homes. Follow our progress here: https://forum.homeone.com.au/viewtopic.php?t=57075 Re: Hiding pool equipment - ideas please?? 4Apr 18, 2013 8:37 pm Building the Riva by Dale Alcock Homes. Follow our progress here: https://forum.homeone.com.au/viewtopic.php?t=57075 Re: Hiding pool equipment - ideas please?? 6Apr 24, 2013 4:24 pm Building the Riva by Dale Alcock Homes. Follow our progress here: https://forum.homeone.com.au/viewtopic.php?t=57075 Re: Hiding pool equipment - ideas please?? 8Jul 28, 2014 11:14 am We are looking at this. Our equipment is quite long and high - we have self cleaning and chlorinator etc. We decided on a beam on wall - with a colour bond roof off it. The costs from different people were unbelievable. Re: Hiding pool equipment - ideas please?? 9Jul 28, 2014 11:15 am sco77k Sorry to bring up an old thread, but has anyone enclosed their pool filter who also has a gas heat installed? The gas unit sits next to the filter. I was thinking of getting a timber box made up for the filter and just cutting holes for the returns to the gas unit? Ours also has a heater. So its long and we needed room above to get cartridges out of self cleaners. I would say both styles you have pictured are steel. The lower chord of the first pic would be a massive lump if made using timber considering the size of the rafters. If… 1 6586 Hi guys We have just removed a very large grape vine which was mounted to a structure along this wall. This is a shared wall with our neighbour, and after removal, we… 0 4152 |