Browse Forums Renovation + Home Improvement Re: Installing skirting boards without bottom pulling in 14Aug 14, 2014 8:55 pm Thanks to all that replied. We went with the clout method and it works beautifully. Just a bit of background; We put the gyprock 10mm off the ground as it's an existing house and the floor was uneven. Carpet layers wanted the skirts to the floor. Carpet is in now and it looks great! Used a 67mm beveled edge skirt. Now just have to try and sort out my crappy painting. Building Standards; Getting It Right! Is this acceptable in a new house build. Floors where installed by builder. Already chips in board and skirting is not flush 0 872 Elvis has left the building... The site supervisor quit after 2 month on the project. I guess he was just instructed to bark at people, but didn't like when he was… 26 21657 |