Browse Forums Building A New House 1 Oct 03, 2011 2:45 pm Hi All, Building a new house, the kitchen glass splash-back has been installed and we have a PCI coming up very soon. The splash-back is meant to be 650mm high, but after having a look at the installed splash-back, it is at-least 4-5mm short at the bottom and has been filled with sealant/glue( 4-5 mm thick glue). The splash-back is 10mm short horizontally. Does anyone know what the standard and tolerances are with regards to the size of splash-backs. Our Bondi Greenwall was impressive from day one with advanced lush plants to provide a wow factor to this recently renovated living area. The boundary was less than 1… 0 19347 2 9698 We are having a bathroom reddone. The builders are putting down two coats of waterproofing and then screed and then another coat of waterproofing. This is what I have been… 0 3440 |