Paving question
Page 1 of 1
Originally I was going to concrete the top and then tile it, but Ive changed my mind and want to pave it.
My question is, should I lay a thin concrete slab and then pack in fine bluemetal, or would it be ok to consolidate the fill and then pack in say, 300mm of bluemetal and then bedding sand?
all fill should be dense compacted every 100mm in depth
( ie: layer compaction)
Related
29/08/2023
3
I had 28m2 of engineered pavers laid six months back and it was difficult to find someone not taking the pi$$. Internet suggested it should be $85-100/m2 to lay them.…
26/12/2023
10
As most others have posted above the install isn't compliant. The pipe is meant to be covered in loose soil or sand, the pipe has holes in it that leaks out a termicide…