Browse Forums Bathrooms and Laundry 1 Jun 09, 2023 12:13 pm First time home owner. Living in Ferntree Gully area of Melbourne under City of Knox. We have a huge laundry and want to convert it into a laundry plus toilet and put a partition in the middle. Do we need a permit/council permission for it? Sorry if it's been asked before! Re: Do I need a permit? 2Jun 12, 2023 12:26 pm You wont need a permit to put in non loading partition but you will need a licensed plumber and a licensed electrician Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog I don’t think so as the floor area over 300 square meters then it is class 3…. 12 18865 No, not yet. It’s currently being assessed by our building surveyor 4 6840 If so what were the "special circumstances" under which it was granted? "Note: If the development consent is for 'dual occupancy' an owner-builder permit can only be… 0 15359 |