Leaking shower head and unsure how to safely open and replace the washer etc due to the unique type of shower taps.
I'm a bit worried about forcing off the tap (top one or bottom one) and breaking the inside if it's not the right way to open it.
Shower Tap - unusual design and leaking shower head
Page 1 of 1
Hi all,
Leaking shower head and unsure how to safely open and replace the washer etc due to the unique type of shower taps.
I'm a bit worried about forcing off the tap (top one or bottom one) and breaking the inside if it's not the right way to open it.
Leaking shower head and unsure how to safely open and replace the washer etc due to the unique type of shower taps.
I'm a bit worried about forcing off the tap (top one or bottom one) and breaking the inside if it's not the right way to open it.
Related
18/07/2023
4
Just to makea point about this, an approach that some people have found sucessful in negotiating these rises down, Is to provide some workings to the builder, specifying…
27/06/2023
2
I'll look into different shower heads and ask the plumber about some engineering and see what he says. Thanks
23/07/2023
11
If you can calculate the reasonable charged head from let's say 100mm below the gutter to the top of where the vertical riser's horizontal discharge pipe will be, that…