Hello,
I am going to check with the VBA on Monday but I thought someone here might have the answer.
I read somewhere that it is a requirement of Building Authorities and Australian Standards that acrylic baths that have a shower over need to be "fully supported with a mortar mix". I cannot find verification of this online.
My contractor has drilled down the old mortar bed to fit the new bath in and he has filled with foam. I want to make sure that it complies with the regularions.
Thanks
WatchingStarredHistory
MembersPros
Browse Forums General Discussion Re: Regulations for shower over bath 2Apr 13, 2024 9:30 pm You need to reference the manufactures installation guide, your supplier may have strengthened the base where it is not required to sit on a bed. We are Expert Consultant's, and we are here to help. 2 9918 It is a lot of work to move it but if you’re u happy with it then the expense may be worth it. Best to ask your builder for a price first so that you can focus your… 2 7731 I had my bath installed incorrectly, on foam instead of mortar even though the instructions specifically said not to install on foam. I was made aware of the issue by a… 0 7219 |
