hi experts,
Can anyone please tell me where I can find the rangehood isolation switch in this Baumatic model please ?
I built a house with Eden Brae back in 2017, and now the rangehood is playing around, the fan turns on and changes the fan level by itself at anytime during the day and night.
It's very annoying, especially at nighttime when my family is sleeping.
I'm trying to find the switch in all the cupboards, under the oven .... But I can't locate it .
I don't know where they hide it. By law it should be visible and close to the rangehood itself in case we need to switch it off for cleaning and maintenance.
Does anyone have the same model or have any ideas where I can find it please?
Thanks all
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅
WatchingStarredHistory
MembersPros
Browse Forums General Discussion Re: Rangehood Isolation switch location 2May 14, 2025 9:43 am  Steven_Lahi experts, Can anyone please tell me where I can find the rangehood isolation switch in this Baumatic model please ? I built a house with Eden Brae back in 2017, and now the rangehood is playing around, the fan turns on and changes the fan level by itself at anytime during the day and night. It's very annoying, especially at nighttime when my family is sleeping. I'm trying to find the switch in all the cupboards, under the oven .... But I can't locate it . I don't know where they hide it. By law it should be visible and close to the rangehood itself in case we need to switch it off for cleaning and maintenance. Does anyone have the same model or have any ideas where I can find it please? Thanks all Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Rangehoods aren't required to have isolation switches. They usually plug into an unswithched socket in the roof space or sometimes it's behind the cowl that runs up to the ceiling. Either way you will need to remove that cowl to find where it's plugged in. Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039  24 Apr 2020 16 Junior Member We are having doors with parliament hinges that open 180 degrees, so kind of have the same issue. We are putting it on the open door side where they have drawn it up on… 1 29533 I've got two options of where to put the indoor unit of my split system. Originally wanted to go with green but that side wall (1.1m deep) will likely block any attempt… 0 47245 Building Standards; Getting It Right! AS3500 part 2 to be exact but I don't have it and I'm not willing to pay $245 for it to satisfy my curiosity on a simple question. I know I need a plumber but that is some… 2 20926 |
