Join Login
Building ForumLighting + Lighting Design

Positioning of two pendants about island bench

Page 1 of 1
How do you get position correct? The bench is 3m, so 750mm and 2.25mm?


Ezza78
How do you get position correct? The bench is 3m, so 750mm and 2.25mm?



At 3m long i would be using 3 pendants if you can


Depends. If evenly spaced, then one at 1m and the second at 2m, that leaves 1m at each end and 1m in between. However, that may not suit your aesthetic, so you could play with that a bit.
If it was up to me i would use 3 pendants as 2 spotlights might not be wide enough to cover the whole length.

Equally spaced would mean 750mm, 1500mm, and 2250mm. It also depends on your aesthetic - you might want them to be all closer to the middle than spread out?


Related
26/04/2024
0
Choosing lighting pendants that will comply with standards

Lighting + Lighting Design

I am trying to find lighting for kitchen, dining areas but looking online, I don’t know if there are specific details I should be looking at to make sure any lights I…

7/08/2023
3
MGP10 pine for an island

DIY, Home Maintenance & Repair

Are you going to have the frame exposed or are you cladding it with something. Usually if you are making an exposed frame you would use solid legs around 100x100 or…

29/05/2024
3
Kitchen island dimensions

Kitchen Corner

Well, it was the default we got with our deign, walking through the build last week felt ok, based on drawings on the floor, it is basically a metre, which is quite a big…

You are here
Building ForumLighting + Lighting Design
Home
Pros
Forum