I'm working on a design for a new home in Moreton Bay council area. The block is 15 metres wide and has a zero lot boundary.
I don't wish to build on the zero lot boundary. But I would like to build closer to the boundary than the nominal side setbacks for the rest of the block.
Local covenant doesn't mention side setbacks and defers to Moreton Bay Council. Moreton Bay defers to QDC, which says side setback is 1.425 metres OMP.
I would like to put my wall at 1.2 metres from the zero lot boundary. Can I do it? Or does it have to be at 0 or 1.425 with no option in between?
Thanks
How far can I build from zero lot boundary
Page 1 of 1
Related
21/10/2023
0
I am building in claymore NSW and this is shown in the building envelope plan. …
20/09/2023
6
You must be new to the internet. You're also the only person anyone here has ever heard of washing their garage wall. I hate to break it to you, there are insects and…
5/04/2024
0
Building Standards; Getting It Right!
Hi everyone, My lot has just been titled and during the settlement we found that the rear pegs were not visible. We requested for a re-establishment and pegging plan…