https://forum.homeone.com.au/u/109081_1697009884.png

Here’s another frame option, flatter and about 200mm wide.. however is not a single subsill tray and has additional addons for the fly doors. Iv been told it’s not as good as the black grey one. wich single tray and sits further in the from the outside..

You can buy a roll of soft zinc flashing and shape it into a z tray. Make sure you dont put holes in the tray. Thanks for the feedback, the door installer will be putting holes into it to install the frame and subsill. Here is a sample with the frame. It’s about 160 wide. The internal floor will be...

Hi Need some advice on best way to flash the thresholds for stacker doors. Currently there are no weep holes and the DPC is running across top of threshold, I think this is problematic for the door installation because the inside slab edge is roughly 10mm lower than the external brick. And the flash...