Browse Forums Building A New House Re: Drop (Deepened) Edge Beam maximum depth/height 2Oct 20, 2023 12:41 pm Architectural Homes & Duplexes - specialising in custom designing homes to your budget Get a Free Onsite Consultation Today or send a PM for information, questions or advice. Re: Drop (Deepened) Edge Beam maximum depth/height 4Oct 21, 2023 8:27 am I had a similar issue with my sloping block. I overcame it by doing 2 DEB's to the ground floor. Each build site is different as is each owners budget so there are Pros and Cons to adding an extra DEB to the slab design like I have done. Check out my build thread here - https://forum.homeone.com.au/viewtopic.php?f=31&t=102241 and a couple pics below. Hope this info helps. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Drop (Deepened) Edge Beam maximum depth/height 6Oct 22, 2023 6:42 am Both my drop edges are not a simple straight line across the slab. The distance between my DEBs varies from 4.1m at the narrowest to 8.1m at the widest. Hello everyone, After some suggestions and ideas about how to put a concrete path around the drop edge beam area on our new build. We are required to have a concrete path… 0 13362 I would like to build our new house with the rear section approx 1 metre out of the ground, I don't particularly like to go bearers and joists so concrete slab all the way… 0 4000 Thanks again for this information. If you do hear anything different, would be great to know 4 8974 |