Nov 21, 2018 2:43 pm
I painted a feature wall in my house with Dulux Concrete Effect and was quite happy with the result. I then sealed it with Bergers Jet Dry Stone and Paving Sealer in natural finish and it looks horrible. The sealer bubbled up and left a crappy glossy finish over the surface - not what I wanted or was expecting.
So I now want to strip it back to re-do. What grit sandpaper should I use to sand back the sealer?
Sign in or Join to reply to this Topic
Ketch123Building a low chemical home - looking for interior wall claBuilding a low chemical home - looking for interior wall cla
ArdoDouble top plate on top on interior wall framesDouble top plate on top on interior wall frames
AFAIK all truss systems are designed to sag. The designer would specify which walls are load bearing and which walls are partition walls. You could just use 45mm top…
Mike8136Sanding and polishing timber floorSanding and polishing timber floor
I did my own floor a few years ago. It is difficult and hard work. You will need an edge sander and the drum sander. I hired from Bunnings also. The result looked pretty…
kylewalkerupI need Reviews for Interior DesignerI need Reviews for Interior Designer
I didn't know about Bean Bags Australia. But I know about ABI Interiors which provide services that you couldn’t imagine that your bathroom also could look remarkable…