Jul 14, 2018 5:38 pm
I need help to determine if the eaves lining I have just demolished contains asbestos. I wore a p2 mask and glasses during demo but didn't consider it would be asbestos at all until a neighbour mentioned it could be (after I had completed it)
House was built in Brisbane, March 1992. The back of the board is stamped Hardiflex.
I have attached some photos. Freaking out a bit.
Re: Asbestos identification4
Jul 16, 2018 9:16 pm
You can get it tested. I did that in Brisbane a few years ago when doing an install at my mother’s place. From memory, it cost about $50 and was worth it for the peace of mind.
Got it tested by COHLABS in Stones Corner. Came back as not being asbestos. Thanks for the advice.
Cost was $44 for one sample to get tested, same day results.
Sign in or Join to reply to this Topic
Han_mcPine floorboard identification (Baltic or Radiata)Pine floorboard identification (Baltic or Radiata)
Hi, We are looking to sand/polish our floorboards which have been hidden under carpet. I am told that we need to know if they are Baltic Pine or Radiata species and I…
building-expertAsbestos around pipe?Asbestos around pipe?
Asbestos is only dangerous if it is disturbed becomes airborne and can be inhaled. To me this looks like an old pipe going through old wall and the penetration is old even…
asbconFake asbestos removal dockets... what should we do?Fake asbestos removal dockets... what should we do?
Update from today... Asked the demo company for a the EPA's Waste Locate Consignment # and they declined to provide it. I think…