Browse Forums Building A New House 1 Sep 12, 2017 8:59 am I'm looking at buiding a 400sqm house with preferably Metricon. Have gone thro Sydney designs. The only one that fits me is Meridian 45 which is believe is expensive, ? base price of 670K. The next choice is vantage 48 (Melbourne design). Don't have the base price but Vantage 46 is $409,990 in Sydney brochure. Wonder if anyone can give me some suggestions? Re: Vantage 48 Anyone has built or in the process of doing s 4Apr 11, 2018 10:26 am Hi JasperL, probably depends a lot what you think of as usual upgrades. I recently got a quote of about $430k base price for Vantage 48 (note: no flooring is included with M base price). I recall Vantage 46 was about $415k, and Vantage 45 about $405k -- there are 48 and 45 models in display villages. The 48 is distinguished from other house designs of the same size by its vaulted ceilings/voids, whereas the 45 is basically a nice 45 square house with a similar floorplan. Re: Vantage 48 Anyone has built or in the process of doing s 5Apr 11, 2018 10:54 am Hi, I pulled off at the 11th hour realizing I couldn't have a good cost estimate until I pay for site inspection & even then there's a lot of hidden cost. Metricon was also very evasive on the time frame of the whole project, up to 2 years when being pressed on the issue. Thanks for your advice. Your best bet might be to go visit the display homes and walk around in them, and take photos. Get a feel for it in person instead of deciding from the floor plan. There… 1 21437 Hi All, we are starting to think of building with Masterpiece Builders in Victoria, has anyone had any feedback or experience with them 0 13588 Hi we are looking to talk to people who have built with them recently. We have signed mid range built contract but identified that a lot of things are not included.… 0 713 |