Browse Forums Building A New House Re: Building with Metricon 5761Jul 27, 2017 1:44 pm Our Bayside KDR Thread: viewtopic.php?f=31&t=78298 Re: Building with Metricon 5765Jul 27, 2017 8:39 pm Cheers Nom Newhaven 36 by M Blog - North Shore Newhaven (http://nsnewhaven.blogspot.com.au) Build - https://forum.homeone.com.au/viewtopic.php?f=31&t=85092 Re: Building with Metricon 5770Jul 30, 2017 12:45 pm To my mind, the top of the handles should be at the top of the glass panel they are currently at the bottom of, and the lock should be in the middle of the doors, not offset. It looks like the right hand side door has been damaged at the top, and either the step isn't even, or the left hand door needs cutting to be parallel to the floor. Our Bayside KDR Thread: viewtopic.php?f=31&t=78298 Re: Building with Metricon 5772Jul 30, 2017 4:30 pm Drew01 To my mind, the top of the handles should be at the top of the glass panel they are currently at the bottom of, and the lock should be in the middle of the doors, not offset. It looks like the right hand side door has been damaged at the top, and either the step isn't even, or the left hand door needs cutting to be parallel to the floor. Thanks for your reply Drew I've been tempted to tell you before whenever I see your profile pic, I get creeped out haha. Anyway, agree, the hadles look lower than they should've been imho. I didn't notice the damage to the door, or the level difference! thanks for pointing it out! Will have a closer look when I go this week! Re: Building with Metricon 5773Jul 30, 2017 4:36 pm The gap doesnt really bother me, its always going to be visible when its a white door and white surrounds, I would probably point it out and try to get it made smaller, but wouldn't cause a huge argument over it. But that handle positioning.. that just looks totally wrong and I would insist on having it fixed. Maybe the installer had been watching too much Game of Thrones and thought they were installing door handles for Tyrion Lannister? Re: Building with Metricon 5774Jul 30, 2017 6:24 pm Spotme Drew01 To my mind, the top of the handles should be at the top of the glass panel they are currently at the bottom of, and the lock should be in the middle of the doors, not offset. It looks like the right hand side door has been damaged at the top, and either the step isn't even, or the left hand door needs cutting to be parallel to the floor. Thanks for your reply Drew I've been tempted to tell you before whenever I see your profile pic, I get creeped out haha. Anyway, agree, the hadles look lower than they should've been imho. I didn't notice the damage to the door, or the level difference! thanks for pointing it out! Will have a closer look when I go this week! I was inside that damn gorilla suit on a 48 degree day Our Bayside KDR Thread: viewtopic.php?f=31&t=78298 Re: Building with Metricon 5775Jul 30, 2017 7:24 pm Re: Building with Metricon 5776Jul 30, 2017 7:39 pm I was charged $1640 for two of them to fit my aluminium stacker doors:: Provide (2No) sets of aluminium framed sliding fly doors with aluminium mesh to suit nominated (3No) panel aluminium sliding stacker doors. Locations: * (1No) 2400mm high x 2688mm wide (nom) Aluminium Stacker Sliding Door to the Family external elevation C * (1No) 2400mm high x 2688mm wide (nom) Aluminium Stacker Sliding Door to the Dining external elevation D Note: Screen will be provided to openable section only. Stacker fly doors are a heavy duty frame with midrail for additional strength and will allow for the interlocking system. Door have been included as a separate item. Re: Building with Metricon 5777Jul 30, 2017 7:42 pm lincoln32 I was charged $1640 for two of them to fit my aluminium stacker doors:: Provide (2No) sets of aluminium framed sliding fly doors with aluminium mesh to suit nominated (3No) panel aluminium sliding stacker doors. Locations: * (1No) 2400mm high x 2688mm wide (nom) Aluminium Stacker Sliding Door to the Family external elevation C * (1No) 2400mm high x 2688mm wide (nom) Aluminium Stacker Sliding Door to the Dining external elevation D Note: Screen will be provided to openable section only. Stacker fly doors are a heavy duty frame with midrail for additional strength and will allow for the interlocking system. Door have been included as a separate item. Wow.. okay I won't complain then haha. and $697 to add a gas point to the alfresco.... bit of joke when JG King charged us $170 when we built our first house with them a couple of years ago! Re: Building with Metricon 5778Jul 30, 2017 7:47 pm elieassi1992 lincoln32 I was charged $1640 for two of them to fit my aluminium stacker doors:: Provide (2No) sets of aluminium framed sliding fly doors with aluminium mesh to suit nominated (3No) panel aluminium sliding stacker doors. Locations: * (1No) 2400mm high x 2688mm wide (nom) Aluminium Stacker Sliding Door to the Family external elevation C * (1No) 2400mm high x 2688mm wide (nom) Aluminium Stacker Sliding Door to the Dining external elevation D Note: Screen will be provided to openable section only. Stacker fly doors are a heavy duty frame with midrail for additional strength and will allow for the interlocking system. Door have been included as a separate item. Wow.. okay I won't complain then haha. and $697 to add a gas point to the alfresco.... bit of joke when JG King charged us $170 when we built our first house with them a couple of years ago! thats a bit rich i reckon.. mine was only $304 for gas to the outdoor room! Re: Building with Metricon 5779Jul 30, 2017 7:58 pm My external gas point was $365 to external alfresco wall. My Journey H1 thread | http://forum.homeone.com.au/viewtopic.php?f=31&t=77665 Nev _________________ Blog | ( will start once received tender ) H1 thread | https://forum.homeone.com.au/viewtopic.php?f=31&t=77665 Re: Building with Metricon 5780Jul 30, 2017 10:19 pm lincoln32 The gap doesnt really bother me, its always going to be visible when its a white door and white surrounds, I would probably point it out and try to get it made smaller, but wouldn't cause a huge argument over it. But that handle positioning.. that just looks totally wrong and I would insist on having it fixed. Maybe the installer had been watching too much Game of Thrones and thought they were installing door handles for Tyrion Lannister? Haha I'll pass on your analogy re the GOT to my SS Hi, First of all, thank you to this community for sharing your thoughts and opinions. We are in early days of our pre-contract stage for Metricon Doulton and we are… 0 10749 Hello All 🙂 We are planning to start our journey of construction our first home. We zeroed down on Metricon and henley homes based on design suitable for our lot and… 0 8200 We don’t live in VIC so want to know the exterior colours of Lumiere display so we can see it at the paint shop. Not building with Metricon so my request went… 0 17332 |