Browse Forums Building A New House Re: Building with Metricon 5492Jun 10, 2017 10:49 am Our Bayside KDR Thread: viewtopic.php?f=31&t=78298 Re: Building with Metricon 5494Jun 10, 2017 1:28 pm Our Bayside KDR Thread: viewtopic.php?f=31&t=78298 Re: Building with Metricon 5499Jun 12, 2017 6:13 pm qldben I wasnt sure where to ask this, so hoping to get some feedback from this group. When putting up a common timber dividing fence, who gets to choose on opting for the flat side? I tried reading up the guidelines here in QLD, but there is no clear indication on who gets to choose. Suggestions? We just asked our neighbours and they were fine. Re: Building with Metricon 5500Jun 12, 2017 6:19 pm qldben I wasnt sure where to ask this, so hoping to get some feedback from this group. When putting up a common timber dividing fence, who gets to choose on opting for the flat side? I tried reading up the guidelines here in QLD, but there is no clear indication on who gets to choose. Suggestions? In NSW if you have a pool and the fence is part of the pool enclosure then the neighbour should get the flat side. My local council told me this or else the cross beams will be classified as foot holds and the fence will not pass compliance unless you have them amended. My Journey H1 thread | http://forum.homeone.com.au/viewtopic.php?f=31&t=77665 Nev _________________ Blog | ( will start once received tender ) H1 thread | https://forum.homeone.com.au/viewtopic.php?f=31&t=77665 Hi, First of all, thank you to this community for sharing your thoughts and opinions. We are in early days of our pre-contract stage for Metricon Doulton and we are… 0 10759 Hello All 🙂 We are planning to start our journey of construction our first home. We zeroed down on Metricon and henley homes based on design suitable for our lot and… 0 8205 We don’t live in VIC so want to know the exterior colours of Lumiere display so we can see it at the paint shop. Not building with Metricon so my request went… 0 17335 |