Building A New House
Feb 06, 2008 10:43 am
Well we've done all of our structural changes, colour choices, electrical plans and we're ready to go! I just had a phone call from our Construction Manager who advised that our land will be cut this Saturday pending good weather. How very exciting! We're building with the Lakewood 28 with the Coastal façade from Adenbrook in South Brisbane. We've found them excellent so far and haven't had any major issues. I will keep everyone up to date with progress.
Re: On the Starting Blocks!!!! PHOTOS of my FRAME! Updated 13/034
Feb 07, 2008 11:52 am
I was told that my block would be cut on Friday and I went past yesterday (Wednesday) and they had just done it that morning. It was a very plesant suprise. If Adenbrook are 2 days ahead then your block might get cut today It's pretty good weather today!!
Re: On the Starting Blocks!!!! PHOTOS of my FRAME! Updated 13/035
Feb 07, 2008 12:23 pm
Excellent, I bet you're happy about that. I don't think we'll have cut land today, we had a little flooding near the land yesterday. I'll be happy with the weekend start. Good timing, we can compare experiences with Adenbrook. It'll be handy for people looking into building with them.
Re: On the Starting Blocks!!!! PHOTOS of my FRAME! Updated 13/036
Feb 21, 2008 12:03 pm
Well everyone, we're now well and truely on the way... Our land has been cleared, the plumbing has been put in, and theres an electricity box up... It's really quite exciting knowing that we'll be living there in a few months... We had our all weather access material turn up the other day which was a surprise, we thought we had to arrange that. So that was coooool! I'll post some pics soon.
Re: On the Starting Blocks!!!! PHOTOS of my FRAME! Updated 13/0311
Mar 06, 2008 9:07 am
A very nice looking slab you have there - now for the slab party
Maybe we could actually have a slab party for everyones slab!! How good would that be..although I drink vodka - maybe not a good idea to drink a slab of that in one sitting
Re: On the Starting Blocks!!!! PHOTOS of my FRAME! Updated 13/0312
Mar 06, 2008 11:14 am
Did they include the air con/hot water/water tank area as part of the slab? I saw a few sites where the builder only use a thin concrete board for those areas, and it wouldn't be as strong as a proper slab that's part of the house.
Suggest to leave it dry for a week or so, then pick a sunny weekend, check every section very carefully for sign of cracks. I bet you won't find any, but it's better be safe than sorry. And should there's be any problem, it's much easier to fix it in early stages then after the frames/bricks on.
Re: On the Starting Blocks!!!! PHOTOS of my FRAME! Updated 13/0313
Mar 06, 2008 11:57 am
Great Ideas.. Thanks for that...
Yes they did include areas like that... They even put one down for the gas bottles which is cool. I'd forgotten about that one!
I will certainly check the slab after a few days, thats an excellent idea...
It might be a bias view, but man, our slab looks so good... I've seen some others that are quite untidy, but this once looks great!
Re: On the Starting Blocks!!!! PHOTOS of my FRAME! Updated 13/0314
Mar 08, 2008 9:25 pm
When your frames are up, make sure you check if any part of the frames over hangs the edge of the slab. I remember seeing someone have similar issue somewhere.
Try to browse through as many posts in this forum as possible, you will pick up lots of things from others!
Update - Photos16
Mar 13, 2008 4:09 pm
Hi Everyone!! We have a frame! We're motoring along at the moment.... Check out the pics...
Front of the house.
Back of the house... You can see the garage door coming from the back of the garage.
Here you can see the two big sliding doors that open up onto our alfresco area... Can't Wait!
This is our nice wide entrance to the house.
Sign in or Join to reply to this Topic
building-expertHoles in the timber slats at frame stage - photos attachedHoles in the timber slats at frame stage - photos attached
Send the photos to the relevant building surveyor and ask them to be taken into account when they inspect the frame for compliance
FrancorussAddress change for corner blocksAddress change for corner blocks
Hi everyone, I am about to build my house on a corner lot in Box Hill, NSW. The address on the registration papers was 'B' street but my house and driveway will be…