Browse Forums Kitchen Corner Re: Blum blumotion soft door closers... 41Jul 29, 2012 12:25 pm GOODLIFE - Bravo - BUTLER http://getmistyfied.blogspot.com.au Display 20/02/2012 PPA 01/04/12 Prestart: 25/07/12 Settlement: 31/07/2012 Contracts:August Slab 19/11/12 BRICKS 10/11/12 Roof 16/01/13 Re: Blum blumotion soft door closers... 45Dec 17, 2012 5:22 pm turtleschell What is a piston drill thing? How does it work? Want to do my own drawers after handover, is there an attachment device like the ones for the cupboards? The Blumotion soft close piston adapts automatically to the force applied to it. If you are going to use them make sure you drill the 10mm hole the exact depth of the piston. I have found if you close the door really hard you can break the piston collar and if your hole is deeper than the piston housing you may end up burying it! I've dug some footings to embed a post anchor into. My holes are around 450mm deep which I'll put a 200mm stirrup into. The bottom of these holes seem firm enough. … 0 3318 I personally think pivot door are over the top, as you said a bit impractical having a small useless section and poor insulation. I’m pretty happy with a 920x 2040 with… 1 276 Black on light wood does look good. Not sure if it will be as long lasting as a steel finish? 6 6352 |