Browse Forums Kitchen Corner Re: Blum blumotion soft door closers... 32Jul 18, 2012 4:46 pm Ours are Hettich, but looking at some comparison shots, look almost the same as the blums.. Going to try out two of these to see if they'll work. The Hettich has the same "hole" for the clip, so might be interesting.. Re: Blum blumotion soft door closers... 33Jul 18, 2012 10:38 pm MattyT Ours are Hettich, but looking at some comparison shots, look almost the same as the blums.. Going to try out two of these to see if they'll work. The Hettich has the same "hole" for the clip, so might be interesting.. Our Hettich soft close hinges do not have any clip-on bit; seems to be fully integrated. Re: Blum blumotion soft door closers... 34Jul 19, 2012 7:32 am PHL MattyT Ours are Hettich, but looking at some comparison shots, look almost the same as the blums.. Going to try out two of these to see if they'll work. The Hettich has the same "hole" for the clip, so might be interesting.. Our Hettich soft close hinges do not have any clip-on bit; seems to be fully integrated. Blums hinges are the same now too. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com Re: Blum blumotion soft door closers... 35Jul 20, 2012 10:58 pm In case anyone still wants these check them out here: http://www.thecableconnection.com.au/Other--Non-related Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Blum blumotion soft door closers... 37Jul 25, 2012 9:13 pm Do you need the hettich ones? The blum ones fit... Re: Blum blumotion soft door closers... 39Jul 28, 2012 4:25 pm I've asked for soft closing drawers in our kitchen and the builder has quoted $150+ per draw...!!!!! I think I'll add these after handover. ----------------------------------------------- http://pab34newdigs.blogspot.com.au/ ----------------------------------------------- Re: Blum blumotion soft door closers... 40Jul 29, 2012 8:30 am PAB_34 I've asked for soft closing drawers in our kitchen and the builder has quoted $150+ per draw...!!!!! I think I'll add these after handover. It will cost you more to do it after handover! You need completly different runners and drawer boxes and then you have to mount the fronts again. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com I've dug some footings to embed a post anchor into. My holes are around 450mm deep which I'll put a 200mm stirrup into. The bottom of these holes seem firm enough. … 0 3403 920 was enough to get the furniture in. We live in a pretty safe area and it’s great to see people walking to the front door. We’re not too fussed about people… 4 1929 Black on light wood does look good. Not sure if it will be as long lasting as a steel finish? 6 6481 |