Browse Forums Kitchen Corner Re: how hard is it to install drawers and how does it work? 2Apr 28, 2012 4:42 pm Remember that the prices you have been quoted are for a full drawer supplied and installed. The kits come with all the hardware but no drawer bottom, back or front. You then have to cut these pieces and then fit it all up. Not hard if you know what your doing but would be a challange for the DIY. Not impossible though. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com Re: how hard is it to install drawers and how does it work? 3Apr 28, 2012 7:48 pm oh dear....i did not know they came with no front back or bottom...in that case i'll just leave it to them.... Re: how hard is it to install drawers and how does it work? 4Apr 29, 2012 2:25 pm unfunkable oh dear....i did not know they came with no front back or bottom...in that case i'll just leave it to them.... Yes unfortunately. Its done this way so you can fit them to anysize cabinet you want. Cutting Edge Kitchens and Cabinet Making http://cuttingedgekitchens.net.au http://www.facebook.com/pages/Cutting-Edge-Kitchens/290484196676 Mobile : 0419 430 575 PH: 9452 4772 Fax :9452 4772 cuttingedgekitchens@outlook.com Pulse is correct. It's the trap that takes up space. The plan shows a vessel style basin so you don't have to worry about a basin inset, it's just the trap that the… 5 2900 5 10826 That's a fantastic result! Happy you got it sorted out. cheers Simeon 6 8849 |