Browse Forums General Discussion 1 Feb 29, 2012 5:25 pm One of the next jobs we need to do is fit out our WIR. We are looking at doing the majority of it ourselves from melimine(sp) board however we finally have a wardrobe big enough to put drawers in it which we would like to buy pre made in a flat pack version. We were wanting wood drawers (not wire ones) and were looking at some from Bunnings. Does anyone have any suggestions of where else we could get them from? Online or in Sydney. Thanks Re: flatpack wardrobe parts 4Mar 01, 2012 11:34 am Have a read at-- http://www.cabinetsondemand.com.au/ Arfur We need to reduce one wall of the house by 45cm to reduce to BAL 12.5, (we need to be 69m from the APZ, we are currently 68.55), however we aren’t sure that we will do… 4 1092 ![]() Hi That looks like plasterboard tape - the paper tape placed over the… 1 1105 ![]() DIY, Home Maintenance & Repair the cupboard has bowed. Very good chance the wire for the switch is running up the wall. Remove the with plate to check, then screw below. 1 902 |