Browse Forums Home Theatre & Automation Re: Splitting Foxtel between rooms 8Nov 04, 2011 11:08 pm Ive read all this but still confused, my situation is slightly different, We have a wall mounted TV and didnt want any boxes on that wall so our austar box is on the wall behind that room that happens to be the garage, we know we need a 3 rca cable to connect the austar to the TV but what do i need to so i can sit in the lounge room and change the channels on the box in the garage? Our Acreage Build The Lakeview Lodge - Beechwood Homes 01/04/10 YES 2010 - Deposit paid 23/09 - PCI CANCELLED 28/09 - PCI - will it happen.-18 months later 07/10/11 - ITS OURS..WOOHOO Re: Splitting Foxtel between rooms 9Nov 05, 2011 6:18 am acrebuild1 Ive read all this but still confused, my situation is slightly different, We have a wall mounted TV and didnt want any boxes on that wall so our austar box is on the wall behind that room that happens to be the garage, we know we need a 3 rca cable to connect the austar to the TV but what do i need to so i can sit in the lounge room and change the channels on the box in the garage? Hi Something like this - http://www.thecableconnection.com.au/Infra-Red-starter-kit---Suitable-for-FOXTEL.html will do the trick. The rectangular receiver goes on the front of your TV. The power supply and connecting block go in the garage. The emitter sticks on to the front of the Austar box and away you go. Paul Re: Splitting Foxtel between rooms 10Nov 05, 2011 8:18 am Perfect, thanks heaps Our Acreage Build The Lakeview Lodge - Beechwood Homes 01/04/10 YES 2010 - Deposit paid 23/09 - PCI CANCELLED 28/09 - PCI - will it happen.-18 months later 07/10/11 - ITS OURS..WOOHOO Old Home Restoration / Renovation To reduce noise transfer without compromising the aesthetic of your exposed I beams, consider filling the 100mm gap between the I beams and the floor above with dense,… 6 9192 The engineering is the engineering. It's irrelevant how much material you have. Unless it fits the requirements of your design the engineer can't "make"it work. You might… 7 9732 |