Mar 09, 2011 10:37 pm
Has anyone used Structural Insulated Panels (or SIP's) for residential construction purposes? I stumbled upon this product via a Homeshow Exibit recently and have become very impressed by research ive done so far, i cant find any negative points about using these panels that enable me to have a house thats R6 insulated, reducing noise factors, excellent fire rating, reduces labour costs/time during construction = saves money both short time and in the long run when i dont require constant air conditioning in summer and avoid huge heating bills in winter. My only hesitation seems to be that not many people have heard of it and seems to good to be true. Has anyone experienced this type of building material or know someone who has, what has been their experience?..Cheers!
Re: Use of Structural Insulated Panels2
Mar 18, 2011 12:29 pm
I too would be very interested in any information!
there is some discussion over on the ata forum:
http://www.ata.org.au/forums/topic/stru ... t3d-pan3ls
Re: Use of Structural Insulated Panels3
May 05, 2011 12:30 am
I built a house from Structural Insulated panels based upon my own research. I know from the company that provided the panels that other places have been built in Canberra and Victoria and Western Australia. I believe that R Control Australia are building units in Western Australia right now.
Re: Use of Structural Insulated Panels4
May 05, 2011 12:34 am
Looking at all the houses built in the USA and now in the UK from SIPs, it is a growth product, proven, used for many years, just new to Australia. With all the concern about sustainable building and the cost of energy, it seems to be the difference between an 8 and 5 cylinder vehicle. The LCA of a house built with SIPs, shows its cost over a lifetime, as well as the fact that it retains or increases in value, is another consideration. The house in Canberra took a week to build and SIPs was used for the floors, walls and roof. Good luck.
Re: Use of Structural Insulated Panels6
May 05, 2011 10:07 pm
is this paneling system anything like hebal paneling,apparently this is a steal reinforced concrete type material,just found out about it and would love to learn more about these alternative building materials
Re: Use of Structural Insulated Panels8
May 06, 2011 7:24 pm
there are different types of SIPs. I am currently looking at panels with an MgO (magnesium
oxide, the new alternative to fibro) skins and an EPS core from PanEco.
sounds good, but I wonder whether anybody has build with this type of material & would
be prepared to comment. Interested in all aspects: pitfalls, cost, speed of construction,
..., the good,the bad & the ugly
Re: Use of Structural Insulated Panels9
May 07, 2011 3:20 am
Yes same here, i am specifically looking at someone that is building or has built and their experiences, cost vs "normal" house construction and any pitfalls.
Also would like to know if the spiel about cost effectiveness once you are living in a SIPs house in relation to minimal heating/cooling, maintenance and building times.
Re: Use of Structural Insulated Panels10
May 24, 2011 8:55 pm
I put my DH's name down at a seminar in Perth to find out more about this product and if there are any builders in Perth who are willing to work with them or if we build through SIPS Industries????
Re: Use of Structural Insulated Panels11
Jun 28, 2011 10:11 am
I am just about to start the design process for a new house near Hobart. The main criteria is to build a fully insulated box that will retain heat. With SIPs how is the interior surface finished, is is a factory finish with joiners or do you apply your own finish material such as sheet plasterboard
Re: Use of Structural Insulated Panels12
Jun 28, 2011 11:27 am
That depends on the "skins" of the SIPs - those with OSB either side seem to need a plasterboard cover (and an external lining).
If the SIP has a metal skin, you'd probably want to cover it with some lining on the inside too; for a fibro/MgO board skin, you
could just set the joints & paint it.
Re: Use of Structural Insulated Panels14
Aug 14, 2011 6:20 pm
I am in Victoria and am interested in SIPs but would like to see something built using them. below is a post from think_wise..
re think_wise "I am building my house in Melbourne with SIPs I would be happy to provide any information or point you in the direction of my builder for any tricky questions.
I am building my house in Melbourne with SIPs I would be happy to provide any information or point you in the direction of my builder for any tricky questions."
would love some more info and a look please
Re: Use of Structural Insulated Panels16
Aug 16, 2011 8:29 am
wanting to know if they are being used in Victoria and if so where and who. Would like to see them insitu. How much $m2 comparisons to other materials. are thre any issues/negatives using them. thanks
Re: Use of Structural Insulated Panels18
Aug 23, 2011 8:12 pm
I'm seriously looking into doing an OB using Paneco, these were the SIPs recommended to me from Barry at UBuild & after a bit of investigation I must say I'm impressed. Apparently they are $89 per sqm cheaper to use than conventional building materials.....
Re: Use of Structural Insulated Panels19
Aug 24, 2011 8:56 am
I too am seriously thinking of using SIPs and have been talking to Andrew at PanEco. I am trying to gather as much info as possible and want to be able to see the panels in situ. I live in victoria, so finding SIP built projects is not easy. If anyone out there has built using SIPs, I would appreciate being able to see them. Thanks
Sign in or Join to reply to this Topic
91 more posts
CoastalNewBuildstructural steel and corrosionstructural steel and corrosion
yep already did that once, sent them the table as i attached in the orignal post and all of the bigger structural steel was pulled out (after initially refusing before i…