Browse Forums Home Theatre & Automation Re: cat6 cabling in new house 7Jun 01, 2008 5:15 pm The other problem is that the insulators doing the roof install could of stepped on or pulled cables and broken them. Sometimes the cable clips used to tie down the cables can break them as well. (Elec's usually use the same clips that hold power cable which is designed to fit that profile) Re: cat6 cabling in new house 8Jun 02, 2008 7:04 am It is most likely that Steve has hit the nail on the head.
Terminating Cat6 is different to Cat5/Cat5E - even the actual sockets are different (even though they are both 4 pairs to RJ45). It could be that the tradie either accidentally used the wrong socket type, or terminated them like Cat5, or both... Yes well there solution is to blame everyone else while I a 65yr old woman with major medical problems have to just continue to boil water and wash myself in a bucket… 2 15998 If you make sure all taps inside and out are turned off, what does the water meter show if you leave it for a while. 2 20229 13 6602 |