Browse Forums Home Theatre & Automation 1 Jan 17, 2011 11:56 am G'day All, Can anyone recommend a person to install a projector, and a fixed screen in sydney ? I have had one quote of $1200 which included $350 for the ceiling mount. ( which I already have) Is this standard or over the top ? Any help appreciated Matt Re: Projector Installer - sydney 2Jan 17, 2011 2:35 pm Hi there, $1200 founds a bit rich, but I would need to know what you are getting for your money. Obviously you don't need the projector mount, so if the $1200 is just for installing the mount and running your supplied HDMI cable, I think that may be a little excessive. If they are completing all of your wiring, installing power points, reinforcing between the timbers to support your mount, installing your projector and aligning the screen, supplying HDMI cable/s etc, then you may be getting closer to the mark. You can't do the work yourself? Golden rule. Get three quotes and pick the middle one. Cheers Greg Re: Projector Installer - sydney 3Feb 01, 2011 7:06 am All, Just a followup for anyone else who may need. After much looking I found http://acoustix.com.au/ I had Basil come out and did the install for $250 - ( Project and Screen) Great guy, fantastic job and super price...He also pointed out that I could put my rear speakers in a better position. I had wanted to but that was how the builder routed the cables. No problem for Basil, he cam back the following week remounted speakers, re-routed cables speakers now where I wanted. he also patched the wall ready for painting. $150. Then wanted to see how the system looked and sounded and made a few tuning suggestion. I would highly recommend Basil for any HT work you need doing nb: I have absolutely no association with Basil or Acoustix HT Hi I live in a 100yr old semi and my neighbour added an additional floor last yr and our architect has advised that we can knock down our semi and build a free-standing… 0 37693 Hi all, We are looking to build a new two storey house in western Sydney. Can anyone recommend a smallish builder to go with? We are trying to stay away from the big… 0 12138 Looking to tile the facade pillars rather than rendering. Builder is quoting 2500$ laying cost for upto 10msq. The 2 pillars come to be 16msq. So laying costs are 5000$… 0 7542 |