Browse Forums General Discussion Re: Removing join strips on a fibro house 2Feb 09, 2007 3:45 pm Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Removing join strips on a fibro house 5Feb 13, 2007 7:47 pm Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Removing join strips on a fibro house 7Feb 14, 2007 7:03 am Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Removing join strips on a fibro house 9Mar 03, 2007 2:57 pm jfalkows I recently bought a fibro house which I'm thinking of painting to freshen it up. I was wondering if there is any way to remove the traditional joining strips that join the fibro sheets and replace them with something a little more subtle to give it a smoother look. Is this possible, and if so, what can I use instead? hey jfalkows, you can remove it, but is it really worth the costs. If its only the joining strips coming off, then expect to pay around $250 + tip fees. Depending on the strips if they are fibro or timber. If you are just wanting to do it for cosmetic reasons, then I wouldn't bother with it. Pick your favourite colour and paint away as the extra stress in trying to get rid of it, IMHO would not be worthwhile. All the best Peace out! 6 11127 The best advice is for you to get a competent building consultant to guide you through your build 7 4648 |