Browse Forums Lighting + Lighting Design 1 Jul 14, 2010 1:09 pm Hi, just got home with a light fixture for the bedroom. Its a shade that goes on the end of a suspension kit. The DIY suspension kit is supposed to have adjustable length - but I have no idea how to adjust it! Here's a link to the suspension kit http://www.getprice.com.au/Horizon-Easy ... 119233.htm HELP! Pete Still having the builder fix / complete things 2 years after moving in! Re: DIY Suspension Kit help! 2Jul 27, 2010 10:56 am Hi PacmanOz, No easy answer to your question. 1. Correct method - the wires would need to be cut (by a qualified electrician) and rejoined to the lampholder. 2. ******* method - the cord could be looped a couple of times and tied up with electrical tape (or the like). This obviously won't look great and there is an element of risk that the looped cord could slip. OR 3. Buy another shorter one - most lighting stores have these available in a variety of lengths. Assuming the structure of your cabinetry is good then I would DIY everything as follows: - replace your counter tops entirely, - replace all drawer runners with soft close… 1 4782 Re my second point – yes exactly. And often it may take additional time if the manufacturer recommends no more than X meters… 3 5643 |