Browse Forums Building A New House Re: Is this quality build ? 2Nov 27, 2007 4:28 am Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Re: Is this quality build ? 5Nov 27, 2007 8:46 am Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Is this quality build ? 6Nov 27, 2007 1:16 pm Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Re: Is this quality build ? 7Nov 27, 2007 1:38 pm davinci,
Looking at the document (Guide to Standards and Tolerances 2007): http://www.buildingcommission.com.au/resources/documents/S+T_GUIDE_07.pdf In Section 8.x.x, Tolerances are discussed but materials used (to achieve these tolerances) are not specified. In other words, if the builder puts a piece ofwood over the gap and it becomes water tight, then they have complied. Not saying I agree with it and it may be referred to elsewhere but I think it will likely turn out that provided the window is watertight, the builder can use their own solution. matt, Wouldn't the lintel have to go into the bricks at the side of the window for support - need to support the weight of all the bricks above. If you do this halfway up a side brick, you would need to cut into the brick. Does this description make sense? I think theonly option here is to put the half bricks at the bottom of the window. Re: Is this quality build ? 8Nov 27, 2007 1:53 pm materal specs in regards to tolernace as the posted link says refers to the building code not the tolernace spec.
yes they can seal the gap with etc etc as stated in the link i posted but they still have to be within the minimum spec. tolerance regardless the builder can use there own solution as long as it complies with the codes a 70 odd mm gap that deviates from the plan spec does not the flushing material etc doe not come into it, the max gap allowable does as i said i will post the max. tolerance , standard etc in regards to a building plan spec when i have them if the gap was as per plan spec. then there is no issue but from the first post info provided it is not Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Re: Is this quality build ? 9Nov 27, 2007 2:07 pm davinci materal specs in regards to tolernace as the posted link says refers to the building code not the tolernace spec. yes they can seal the gap with etc etc as stated in the link i posted but they still have to be within the minimum spec. tolerance regardless the builder can use there own solution as long as it complies with the codes a 70 odd mm gap that deviates from the plan spec does not the flushing material etc doe not come into it, the max gap allowable does as i said i will post the max. tolerance , standard etc in regards to a building plan spec when i have them if the gap was as per plan spec. then there is no issue but from the first post info provided it is not davinci, Can I say (again) how wonderful it is to have you on this forum. The efforts you put in are much appreciated. Cheers, Casa Demolition August 2009, Construction Started September 2009, Completed December 2010 Re: Is this quality build ? 10Nov 27, 2007 3:07 pm spoke to building commision
if the window is not as per plan spec. without structual justifacation then they would deam it to be a defect you need to put in writing why is the window not as per plan spec why is the window diffrent to all other windows why is the window diffrent to the display house you want the window to be as per plan spec, to be the same as all the other windows and as per display home the builder then has to respond in writing they have to have a legitimate reason for it if you are not satisfied with it call consumer affairs they have a body called the bacv it is free of charge and is in relation to building disputes, before you take the next step of legal action, which probably wont be necesary for a simple widows balls up Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Re: Is this quality build ? 11Nov 27, 2007 3:08 pm it is a window and not a door right? Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com Re: Is this quality build ? 12Nov 27, 2007 4:03 pm davinci it is a window and not a door right? The photo is a bathroom window, bathtub is level to window. Does it matter ? The house has other 3 gaps are above doors. As casa says you are fantastic. really appreciate the effort you put in. Same goes to other members. Re: Is this quality build ? 13Nov 27, 2007 4:12 pm Ben firstly check that the window size is the same size as on the window schedule.
Secondly check that the height of the window sill is the same dimension as shown on the drawings. As for infills over the top of windows and doors it is not uncommon and it does not contravene either the BCA or Standards & Tolerances or any other building code. The argument you may have is that it does not match the display home [which is what you assumed the finish and standard of your home would be] Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Is this quality build ? 14Nov 27, 2007 4:53 pm I would imagine that standard windows are sized to fit between a set number of courses of bricks.
Could it be that the mortar is a bit thick, resulting in a larger distance between the required courses of bricks, and therefore you get the gap? Re: Is this quality build ? 15Nov 27, 2007 5:58 pm (As for infills over the top of windows and doors it is not uncommon and it does not contravene either the BCA or Standards & Tolerances or any other building code.
The argument you may have is that it does not match the display home [which is what you assumed the finish and standard of your home would be]) _________________ his argument has nothing to do with infills uniformity and plan specs in regards to GAPS is not once did i say infills contravine anything read the post correctly display home matching is of a second recourse plan spec and uniformaty as previously stated is Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com BSA 16Nov 27, 2007 8:01 pm Why don't you call the BSA in your area?
You can ask them. At the end of the day they are there to assist you. I wonder how many people are checking BSA license history on BSA website. If the builder had any problems before the history will show it all. What BSA does for the us, customers? BSA will inspect the house and make the list of things to be rectified. This will be noted on the builder's license history so builders are fixing things very quickly. I would like to also remaind you that H***** had their license withdrawn due to the problems and they came back to QLD after few years under different name. Cheers kate Re: Is this quality build ? 17Nov 27, 2007 9:31 pm All of you have good points & we value them.
To us infill are meant to fix mistake and degrade the quality that they marketed to us (and others). We made our purchase decision by what we see at the display home and in the contract drawing. (Apart from the size, some colour and additional sliding door our house is identical to the display home.) This home they position it among the top of their range so we would expect good quality. From what I read from the responses you are all agree that a mistake is made somewhere. From our experience so far, the only way to make them fix things is by regulatory compliance and legal means. So we would be very interested in people's success rate going down this path (espcially those with similar issue like ours) and in your opinion how strong our case is ? (you might have to discard builder's moral obligation in your assessment. ) All inputs again will be appreciated. PS: We have had other issues with this builder which we'll start topics on and seek your thoughts separately. So watch out for Ben. Re: Is this quality build ? 18Nov 28, 2007 5:54 am Hard day at the office davinci.
I apologise for misreading and misunderstanding your reply. I was reading too much into Bens question instead of just looking at the gaps. I've had this problem since I became left handed. Peter Clarkson - AusDesign Australia www.ausdesign.com.au This information is intended to provide general information only. It does not purport to be a comprehensive advice. Re: Is this quality build ? 19Nov 28, 2007 11:45 am did not intend to get heated, was not directed at you , the forum is for answers and also debate, my bad
i see red when builders etc dont do the right thing being a landscaper and designer i quite often have to deal with and work around other peoples mistakes nothing gets me more annoyed no offence was intended Da Vinci Outdoor Living Architectural landscaping http://www.davincioutdoor.com It's MGP 10 which means every length has been machine graded to it's specified engineered strength. It may not look pretty and if you where hand picking your timbers you… 1 378 Thank you so much everyone. This all makes a lot of sense. I guess when you talk to a builder who butters up everything to look very polished, you get to start believing… 7 19103 Hi We have finally decided to complete a KDR on our corner plot in NE Melbourne suburbs. Given its a corner plot approx. 400 sqm just a standard design may not fit the… 0 9084 |