Idiot!!!
Most impressive everyone, I enjoyed this thread so far!!!
Browse Forums Building A New House Re: What bricks did you choose - Show and Tell 21Nov 07, 2007 3:40 pm Internal and External Building and Colour Consultant Online - Worldwide http://www.denovoconcepts.com Re: What bricks did you choose - Show and Tell 23Nov 07, 2007 9:06 pm We chose to upgrade heaps to Daniel Robertson Hawthorn Black Blend - must say we absolutely love them. U see them lots in Melb
http://www.danielrobertson.com.au/ Re: What bricks did you choose - Show and Tell 24Nov 07, 2007 9:07 pm For those interested in seeing what Austral's Canterbury looks like:
and here in place Images from Austral's website (Victoria range) Nice to see a revival in face brick (render is so high maintenance). Cheers, Casa Demolition August 2009, Construction Started September 2009, Completed December 2010 Re: What bricks did you choose - Show and Tell 25Nov 07, 2007 9:15 pm Casa,
You beat me there! I once took a photo of Austral's Canterbury.. here it is... [/img] ----------------------------------------------------------------------------------------- Built the Nevada 42 Next project - landscaping! Re: What bricks did you choose - Show and Tell 27Nov 08, 2007 9:01 pm Nice choice fojean
We used Blue Rain on our previous house; I think it was one of the first houses to use the brick. The house was featured on the cover of Selkirks old catalogue. The new catalogue has us on pages 2 and 16. They also used the picture at the Home Ideas Show some months ago. We are using Selkirks Tawny Heritage on our new house. When selecting a brick you should be aware that the mortar colour and type of mortar joint can greatly effect the appearance of the brick. Re: What bricks did you choose - Show and Tell 28Nov 08, 2007 10:01 pm I LOVE blue rain - would look fantastic with off white flush mortar! Can you please post pictures if you have any! .....but if we go with one of the big builders we are looking at its a category 5 upgrade so it may be a fair bit extra! If it is too much we will go for Tawny heritage as it is cat 2 if we go with this builder! We don't like any of their standard range. Ruth -Bought house in Melbourne inner burbs, knocked it down & now...we are owner builders! Completed OB project and moved in to our new home with our new baby in May 2009! Re: What bricks did you choose - Show and Tell 29Nov 09, 2007 7:18 am Hi rerob1
I'm busy on the new house at present, but i should be able to post some pics over the weekend, if I can figure it out We used flush joints and the mortar was coloured very lightly with black , we used white sand....I can't remember the type of cement unfortunately. We felt that white would have been too stark, and natural mortar (yellow sand grey cement) was never going to be an option. Ultimately we got the colour we were after Blue Rain are a little more expensive than Tawny Heritage, but for a modern design house are a much more suitable brick, in my opinion anyway. Good luck with your house!! Re: What bricks did you choose - Show and Tell 30Nov 09, 2007 7:18 am Is this the Blue Rain you mean?
http://www.selkirk.com.au/photos/pages/BlueRain.html Its really beautiful if it is! Fiona Re: What bricks did you choose - Show and Tell 31Nov 09, 2007 7:28 am I forgot to mention, that when I priced the bricks a few months ago, the Blue Rain was about $200 per thousand more expensive than Tawny Heritage.
So even if you had 10000 bricks it is not a huge sum of money. Off white cement costs about $2 per bag more than grey cement, and white sand is a little more expesive than yellow brickies sand. Flush joints are standard and come at no additional charge. I'd be interested to see what their additional charge for BR is Hi Fiona Yes thats our house (now sold) done in Blue Rain. We designed it ourselves and did it as owner builder. Not a bad little shack !!! Re: What bricks did you choose - Show and Tell 32Nov 09, 2007 7:32 am shanem Hi Fiona Yes thats our house (now sold) done in Blue Rain. We designed it ourselves and did it as owner builder. Not a bad little shack !!! I'd love a little "shack" like that! it looks absolutely beautiful - such clean lines and very stylish - well done! Fiona Re: What bricks did you choose - Show and Tell 34Nov 10, 2007 12:27 am We haven't chosen our bricks yet. I want to go to the "brick shops" to have a look, so we get an idea of colour etc.
Just driving around the estates we see cream, cream, cream, cream, cream, cream, red, red, cream, cream, cream. So you can probably guess that I am soooo over cream at the moment. Problem is most of the bricks I have seen on the web (for WA) are cream, pinkish and red bricks. I want brown darn it, not tan, not cream but brown, preferably dark brown and smooth, not the look like someones dropped it a few times. (I seen a nice mocha or coffee or something on one of the vic ranges). I may try to talk the OH into the zinc or graphite colour. One thing for certain is I am not going cream. I will take red (and be pretty unhappy with it) if the grahite/zinc are to dear..... which I guess they will be. Re: What bricks did you choose - Show and Tell 35Nov 10, 2007 8:02 am sorry gang..been away for a couple of days....
we are very happy with our choice and seeing the comments is very pleasing! beautiful house you sold shanem....our builder (Henley) offer the two mortar colour choices - the standard and the off white that we chose - is that a suitable choice shanem or shoould we ask for a particular mix. What mix was used in the house featured on the catalogue??? Re: What bricks did you choose - Show and Tell 36Nov 10, 2007 9:39 am Be clear on what colour the sand is, not just what colour cement they are using. Re: What bricks did you choose - Show and Tell 37Nov 10, 2007 12:49 pm Hi fojean
Thanks for your interest. To get that colour mortar we used off white sand (Mukadilla sand I think its called), with grey cement and black oxide and of course lime. I can't remember exactly how much oxide we used. We cut about 100mm off the bottom of a plastic Coke bottle and put two scoops of oxide in each mixer load. (Don't expect brickies to have a proper measuring cup !!!) You should be aware that any black coloured mortar will fade fairly quickly despite looking like coal in the mixer. The more you dose it with oxide the longer it will take to fade though. Also the picture was taken a short while after a light shower of rain , which may give the mortar a slightly darker appearance. To reinforce parkers comment, the sand colour is the most important. Even if you used white cement with yellow brickies sand , you will not get off white mortar. There are also several types of white cement available, that can give slightly different results. There is standard brickie's off white cement, then Brighton Light, which is slightly brighter (both are about the same price per bag) and there is Pure White cement which is about double the price. Also remember the type of mortar joint can affect the overall appearance of the brick as well. We used flush joints. The best thing to do is ask the brick manufacturers questions. They are more than happy to help you. Selkirks also have some info in their catalogue. Good luck with your project. Re: What bricks did you choose - Show and Tell 38Nov 10, 2007 2:41 pm Well, I still cannot decide .
I have driven all around Berwick this morning looking at various addresses with Austral's Cantebury, Hawthorn and Latrobe, but still love Daniel Robertson's Hawthorn Black Blend the best. Arrrggghh!! Why does the nicest brick always have to be one of the most expensive! If anyone knows of any addresses with Austral's Hawthorn or Selkirks Tawney Heritage with off white motar, please PM me or post pics! The only Tawney Heritage we have seen has the natural mortar and it just accentuates the 'tan' look, which I would like to stay away from if at all possible! Henley - Wilshire Mk 3 ... I love my house!! Site start: 4th Feb 09 Handover: 10th Sep 09 Blog: http://stormygirlscastle.blogspot.com/ Build Thread: viewtopic.php?t=7166 Re: What bricks did you choose - Show and Tell 39Nov 12, 2007 1:31 pm This is what we have gone with (Benalla)
It looks a bit rough, especially close up but I think once they have been cleaned and in the context of the whole house, they should look ok. Re: What bricks did you choose - Show and Tell 40Nov 12, 2007 6:34 pm parker Be clear on what colour the sand is, not just what colour cement they are using. I'm still really annoyed about our mortar. We deliberately specified yellow sand be used to give a slightly creamy natural mortar colour. They used red sand, and it is a dark yellow. Builder doesn't give a stuff. Husband doesn't give a stuff. I do!!!! Anyway, back on topic ... some pictures of our Austral Renovation Red bricks. Our delivery did not include enough of the darker bricks, and the brickies seemed to have issues following the mix instructions ... we only have one dark face brick in our entire back wall!! Pressed red seconds may be a better bet if you want it to look like the Renovation Red sample wall. http://i236.photobucket.com/albums/ff151/melbournelyn/bricks1.jpg The worst looking patch of brickwork - smack bang in the front of the house! http://i236.photobucket.com/albums/ff151/melbournelyn/bricks2.jpg Rolled, yellow mortar. http://i236.photobucket.com/albums/ff151/melbournelyn/bricks3.jpg No the fireplace doesn’t work. It’s been enclosed. I’m not sure what was removed, as it was done quite some time ago - well before what I can see with photos online… 2 11584 DIY, Home Maintenance & Repair to do it properly you need to dig out the garden and waterproof the outside of the wall. There are some products you can put on the face of the bricks but the water is… 2 4624 |