Browse Forums Flooring & Floor Covering Re: Polished Concrete snags 2Jul 17, 2009 1:33 pm Regards, Ben Vander Veen PROGRIND AUSTRALIA Maintenance Free Polished Concrete, without coatings! www.progrind.com.au Re: Polished Concrete snags 5Jul 17, 2009 3:34 pm Regards, Ben Vander Veen PROGRIND AUSTRALIA Maintenance Free Polished Concrete, without coatings! www.progrind.com.au Re: Polished Concrete snags 7Jul 17, 2009 4:35 pm Hi Brian, I'm not sure about the second issue, but I can't see that there is a problem with the shower. We were going to have polished concrete in the shower in our ensuite, and have no door on our shower. We had no problems with the builder, he was happy to do it. The only reason we aren't going ahead with it in the ensuite now is because we wanted under tile heating in there. Good luck 'chelle We have a hand-over date...15/10...but I won't hold my breath! http://people-in-glass-houses.blogspot.com/ Re: Polished Concrete snags 8Jul 17, 2009 5:19 pm jbdave Ben, How would you apply an anti slip finish to an area such as a shower base ? jbdave, There is not one. When wet, the polished concrete has a greater COF than most natural polished stones. Regards, Ben Vander Veen PROGRIND AUSTRALIA Maintenance Free Polished Concrete, without coatings! www.progrind.com.au Re: Polished Concrete snags 9Jul 18, 2009 3:20 pm jbdave Here is a notice from the MBAV a couple years ago. Hope it helps. Jbdave, thanks for posting the info. I'll be going for the uncoated concrete as Ben has described. I've got a sample and when you you run your fingers across it they seem to "grab" a bit. I can't see slipperiness being an issue. Hi all I need a guidance on how far I need to space expansion joints in the concrete driveway and its type (keyway/foam.) Contraction joints are at 3m max for a 125 slab. Thanks 0 10989 I couldn't attached the photo for some reason. Here is the link to the photo https://pin.it/79jwdMp 1 3142 |