Browse Forums Building A New House Re: Frame Overhang Solutions 6Aug 26, 2023 3:46 pm Architectural Homes & Duplexes - specialising in custom designing homes to your budget Get a Free Onsite Consultation Today or send a PM for information, questions or advice. Re: Frame Overhang Solutions 9Aug 27, 2023 10:23 am Architectural Homes & Duplexes - specialising in custom designing homes to your budget Get a Free Onsite Consultation Today or send a PM for information, questions or advice. Re: Frame Overhang Solutions 11Aug 27, 2023 11:47 am Foremost Building Expert in Australia,assisting with building problems/disputes, building stage inspections,pre-contract review advice for peace of mind 200 blogs http://www.buildingexpert.net.au/blog Re: Frame Overhang Solutions 12Aug 27, 2023 12:24 pm building-expert Regardless of right and wrong the practical solution is to just add another floor joist and plane it down at narrow end (near the house to align with wall frame above, use the added joist as packing. Your bearer will need to be cut back as well as your joist to align. I think that will pass. When you look at the timber bolted to stump, it will all align with base boards. Move on. Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Perfect. Thank you. This is the best I have, as it is plastered internally now. I should add there is a steel post in the corner of the room between the window and the glass sliding door,… 3 751 Thanks Ardo, they are sort of semi concealed. I think it is only a few millimetres. I see if they can adjust the hinges. 4 4018 I would find out how deep your clay base is and depending on the depth install a cut off drain which is more than a normal agi drain. Where the neighbouring walls is… 2 3249 |