Browse Forums Building Standards; Getting It Right! 1 Dec 17, 2022 1:18 pm Re: should this bother me…. 2Dec 17, 2022 1:21 pm Yes, there should be a min. cover specified for the capping hth Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs Re: should this bother me…. 3Dec 17, 2022 2:14 pm Thanks for the pointer.... 75mm if I'm reading the standard correctly. https://ncc.abcb.gov.au/editions/2019-a ... -351-sheet Joints in flashings and cappings must be not less than 75 mm, lapped in the direction of the fall of the roof, and fastened at intervals not more than 40 mm. Re: should this bother me…. 4Dec 17, 2022 2:21 pm Designer,Engineer (Civil,Const & Envir),Builder,Concrete & Masonry Contract.Struct Repairs i imagine you also have another contract with an architect? and yeah, whatever other's said about special conditions and appendices 16 16665 hey there! 😊 so, it’s kinda common for standard drawer depths to be around 500mm since most cabinets use this size to fit the usual runners… 3 21389 I've decided, after a period of confusion (my building broker told me it's probably not worth it to use a lawyer, but others have said it is a must) that I definitely will… 7 28265 |