Nov 12, 2020 8:49 am
We are in the final stages of construction and didn't include any tiling/decking on the rear outdoor area and I think I'm regretting not having it included.
While I am going to organise something after handover, I'm interested in how it should come together since it's raised with the exposed top of the external bricks with the gap between the slab.
If I was to tile the area, what's the best way to fill that gap and go to the end of the brick?
Also, wouldn't a railing be a challenge to fix to the floor over those bricks with holes?
Would love to hear thoughts of others that have similar.
Re: Raised alfresco on slab2
Dec 02, 2020 8:22 am
I'd be asking the building why the slab doesn't cover the bricks and go to the edge fo the building footprint. There also appears to be some rubbish in the gap.
To put a surface over the area and cover the gap you could use timber battens and decking or composite decking.
Sign in or Join to reply to this Topic
tim.jonesHelp with raised garden bedHelp with raised garden bed
Hi guys. Would appreciate some advice. I have built a raised garden bed around 30 to 60 cm in height. The lowest point is 30 cm in height and the highest point 60 cm. I…
TakemymoneySlab Power Cabinet placement Post SlabSlab Power Cabinet placement Post Slab
Does this look right? I don't know muh about slabs construction etc, though seems to me this would weaken the slab? I don't see.the next to do it.right on the edge of slab?
MauromarioSlab heave/ slab design/ engineering questions.....Slab heave/ slab design/ engineering questions.....
Underpinning done and Agricultural pipe installed 800mm deep in to clay around the house, just waiting on the engineers report that we had done 12 on the after the works…
StructuralBIMGuySlab poured without pre slab inspectionSlab poured without pre slab inspection
Unfortunately, Changing the day and time is an old builders and concreters trick and they get away with it most of the time. These days if engineers suspect somethings is…