Browse Forums Building A New House Re: Thomas Archer Hive 46 (customised) Build 2020-21 3Jun 26, 2020 3:36 pm https://thomasarcherbuild.blogspot.com/p/blog-page.html - Thomas Archer Homes - Custom Nouveau 41 Re: Thomas Archer Hive 46 (customised) Build 2020-21 15Jul 30, 2020 7:00 pm https://thomasarcherbuild.blogspot.com/p/blog-page.html - Thomas Archer Homes - Custom Nouveau 41 Re: Thomas Archer Hive 46 (customised) Build 2020-21 19Aug 04, 2020 4:16 pm Hi Thanks for sharing your tips and all the upgrades! We just started researching for a builder and have spoken to countless builders - from Porter Davis, GJ Gardner, Carter Grange, to other smaller independent builders but found TA to be very aligned to what we like! We are in the process of talking to TA but would like to find out more about the pricing of the upgrades if you don't mind sharing. Appreciate your help. Thank you so much and good luck on your build! =) Re: Thomas Archer Hive 46 (customised) Build 2020-21 20Aug 05, 2020 12:54 am kathz Hi Thanks for sharing your tips and all the upgrades! We just started researching for a builder and have spoken to countless builders - from Porter Davis, GJ Gardner, Carter Grange, to other smaller independent builders but found TA to be very aligned to what we like! We are in the process of talking to TA but would like to find out more about the pricing of the upgrades if you don't mind sharing. Appreciate your help. Thank you so much and good luck on your build! =) Hi Kathz, pm me what you want to know and I will help wherever I can. We spent close to 2 years in a process with TA. It was horrible..... we got to tender, and the first cut was 50% over our budget which "they care such about meeting ". We… 18 27322 Thank you so much everyone. This all makes a lot of sense. I guess when you talk to a builder who butters up everything to look very polished, you get to start believing… 7 17628 Hi We have finally decided to complete a KDR on our corner plot in NE Melbourne suburbs. Given its a corner plot approx. 400 sqm just a standard design may not fit the… 0 8578 |