alexp79
Stewie D
See my previous post - "As for the studs, we are probably going with 90mm for both ground and first floor. As for aligning them ? Huh? There are floor joists and sheet flooring sitting on the top plate of the ground floor, then the bottom plate of the first floor sits on that."
If we went with 140mm it still wouldn't be a problem.
I can post a drawing if you like.
Stewie
If we went with 140mm it still wouldn't be a problem.
I can post a drawing if you like.
Stewie
As long as your structural engineer will be happy with the fact that around 1/3 of your top level studs are not really load bearing while other 2/3 is
You really don't understand building do you?
But it doesn't stop you telling a builder that he is wrong??
Trust me, Stewie knows what he's talking about.