Browse Forums General Discussion Re: Front Door handle after handover 3Jul 05, 2020 9:24 pm That door has a mortice lock with a square black escutcheon plate and separate architectural handle. The builder can install the lock without the handle and will still be able to achieve lock up. Then add the handle after. Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Re: Front Door handle after handover 4Jul 11, 2020 9:10 am chippy That door has a mortice lock with a square black escutcheon plate and separate architectural handle. The builder can install the lock without the handle and will still be able to achieve lock up. Then add the handle after. thanks so much chippy!!! Re: Front Door handle after handover 5Jul 11, 2020 9:51 am chippy That door has a mortice lock with a square black escutcheon plate and separate architectural handle. The builder can install the lock without the handle and will still be able to achieve lock up. Then add the handle after. Hi chippy if we have double door entry then what would be the lock options ? Can we get smart locks for double doors ? Thanks. Re: Front Door handle after handover 6Sep 10, 2020 3:20 pm Dominique We asked our builder to order ours in, would yours? I was worried the holes wouldn’t align in the frame. did you just ask them? unfortunately my builder is quite strict about only installing the products they are offering from their catalogue Re: Front Door handle after handover 7Sep 10, 2020 3:43 pm elloelloelloqwer Dominique We asked our builder to order ours in, would yours? I was worried the holes wouldn’t align in the frame. did you just ask them? unfortunately my builder is quite strict about only installing the products they are offering from their catalogue /quote] They originally said no but I asked whether we could have a nominated trade install the lock and they then gave us a few options of smart locks they could install. We’re with summit Get some long brass machine screws and bolt right through the gate and put brass acorn nuts and washers on the other side. It will never come off 1 9083 Black on light wood does look good. Not sure if it will be as long lasting as a steel finish? 6 6356 Building Standards; Getting It Right! AS2047 Section 6 Page 31 speaks to Construction/Tolerances of Windows and external glazed doors in buildings Check also New South Wales Guide to Standards and Tolerances,… 12 24829 |