Browse Forums Building A New House Re: Rawson Balmoral 38 MK1 - Newcastle NSW 134Jun 07, 2020 12:28 pm Great thread, mate. Looks like I'll be the next Rawson on the block. Pretty sure I'm building in the remaining blocks to your right, if I think you are where I think you are. I've been watching the Rawson's along your street over the last two months pretty keenly. Re: Rawson Balmoral 38 MK1 - Newcastle NSW 135Oct 10, 2020 7:07 pm Hi, I was searching the forum and I saw that you got Prime laminate for your floors. We have been suggested this brand and wanted to find out how you are going with the floors that you have? Any issues? Re: Rawson Balmoral 38 MK1 - Newcastle NSW 136Oct 16, 2020 7:59 am jmlight Hi, I was searching the forum and I saw that you got Prime laminate for your floors. We have been suggested this brand and wanted to find out how you are going with the floors that you have? Any issues? We have a few install issues, the co who installed them is being difficult to deal with and we're not getting any resolutions (apparently the boards got wet during transit so we have a few boards in our storeroom which didnt fit right) The product itself though we've been happy with. I wanted solid timber flooring but rawson didnt do it so this was a comprimise. likes: relatively affordable, relatively easy to maintain, if you drop a glass it doesnt smash cons: we have these squeeky spots in the boards where it clicks and crunches as you walk on it (comes and goes dunno if its temperature/humidity dependent?) as mentioned above some boards are protruding due to poor fitment and the installer wont rectify.. Re: Rawson Balmoral 38 MK1 - Newcastle NSW 137Oct 16, 2020 8:01 am mguerre76 Great thread, mate. Looks like I'll be the next Rawson on the block. Pretty sure I'm building in the remaining blocks to your right, if I think you are where I think you are. I've been watching the Rawson's along your street over the last two months pretty keenly. Hi mate jeez sorry for the late reply havent been on homeone for quite some time since our build had been completed and we had handover at the end of may! Our house is definately unique so I dont think you would get us mixed up with anyone else Congrats on your commencement of your build with rawson. That street would be a good little spot tucked away and no traffic going down through there. Let me know if you have any questions or if we can help in any way #rawsongang! Re: Rawson Balmoral 38 MK1 - Newcastle NSW 138Oct 16, 2020 8:29 pm ourrawsonbalmoral38 jmlight Hi, I was searching the forum and I saw that you got Prime laminate for your floors. We have been suggested this brand and wanted to find out how you are going with the floors that you have? Any issues? We have a few install issues, the co who installed them is being difficult to deal with and we're not getting any resolutions (apparently the boards got wet during transit so we have a few boards in our storeroom which didnt fit right) The product itself though we've been happy with. I wanted solid timber flooring but rawson didnt do it so this was a comprimise. likes: relatively affordable, relatively easy to maintain, if you drop a glass it doesnt smash cons: we have these squeeky spots in the boards where it clicks and crunches as you walk on it (comes and goes dunno if its temperature/humidity dependent?) as mentioned above some boards are protruding due to poor fitment and the installer wont rectify.. Thanks for the response. Hopefully you get the issues sorted or at least Rawson helps you to rectify it. Just started the Build process for Chifley 42 with Rawson homes, will keep you all posted with the Build progress. 0 2451 In NSW the maximum deposit for building work is 5% until the builder provides HBCF insurance 1 4821 Hi All, see above image. The required setback from the rear boundary in my case is 5m, as you can see the shape of the site and location of the boundary is slightly… 0 8451 |