Mar 02, 2020 10:08 pm
Could someone please clarify the front setback requirement of black town council.
I got a land in Akuna Vista- Schofield, size is 10m*30m. My builder is saying I have to keep 4.5m as front setback measured from front line of the facade (not the from building wall).
I am not sure about this and appreciate any feedback? Is it measured from the front line of the facade or from the front building wall?
Also, I saw in a document saying that we can have 3m as front setback if the lot is in a newly developing area, Not sure whether this applicable to Akuna vista.
Appreciate any comments from guys already built in Akuna vista or black town councils area
Thanks in Advance
Re: Front setback - Akuna Vista -Blacktown Council2
Mar 03, 2020 7:38 pm
Hi, I think the setbacks are correct since we have the same. You can check through this link:
https://www.planning.nsw.gov.au/-/media ... .pdf?la=en
4.5m to front facade, the porch can encroach slightly, the garage needs to be 1m behind so 5.5m from the boundary.
Re: Front setback - Akuna Vista -Blacktown Council3
Mar 03, 2020 9:44 pm
Re: Front setback - Akuna Vista -Blacktown Council4
Mar 03, 2020 9:45 pm
Re: Front setback - Akuna Vista -Blacktown Council6
Mar 06, 2020 8:38 am
As per Penrith council, B should be 4.5 and A they don't allow. But you can talk to the council and come to an agreement.
Current State: Slab/Frame/Bricklayer/Lockup/Lining/Stairs/Kitchen/Wet flooring/Painted/PCI/Got the Keys
My Thread: Building Windsor 40 with Eden Brae (Caddens)
Re: Front setback - Akuna Vista -Blacktown Council7
Mar 19, 2020 10:28 am
Your porch is your articulation zone, so it will be 4.5 to the building facade, not the porch. So B is what it should be.
Sign in or Join to reply to this Topic
HaminZaSetback rule: Cumberland Council DCP vs. SEPP Housing code?Setback rule: Cumberland Council DCP vs. SEPP Housing code?
Hi Duo2, Forgot to respond. SEPP/CDC prevails and will overide all DCP controls. I also concur with above comment. The process suggested will confirm also which pathway…
RameshNBlacktown NSW KDR with King HomesBlacktown NSW KDR with King Homes
Can you share details of your cut & fill (in MM) and the class of the slab you have ? Looks pretty flat (excellent !!) & almost double layering of slabs from slab…
HillsbuildsKDR in Bella Vista - Hills Shire DA experience &KDR in Bella Vista - Hills Shire DA experience &
Lol, hope you start a thread documenting your build then, I would love to follow! We didn’t really have any issue with our GF design. It pretty much satisfied all the…
janeeeeySide setback relaxation (Moreton Bay)Side setback relaxation (Moreton Bay)
Is there any one who have applied or got an approval for side setback relaxation for Moreton bay? I am planning to build a house in narrow lot (which is 10m x 40m in…