Browse Forums Kitchen Corner Re: Kitchen and appliances damaged by kitchen company 21Aug 10, 2019 11:03 pm Here are some more photos of more damage and defects. There’s actually a lot more this is just a portion of the damage and defects Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Like ⋅ Add a comment ⋅ Pin to Ideaboard ⋅ Re: Kitchen and appliances damaged by kitchen company 22Aug 10, 2019 11:14 pm Also I have taken photos of the sticks could anyone tell me what material? I’ve had feedback that this does not appear to be moisture-resistant? Just plain old ordinary mdf? And also taken photo of cross section and piece of cut off that I took apart I’m having a hard time loading the photos so I’m going to link the photos instead https://dl.dropbox.com/s/uiirpgxlikjsds ... m.jpg?dl=0 https://dl.dropbox.com/s/ck0wp3hr2os670 ... m.png?dl=0 https://dl.dropbox.com/s/7ugnc9spsg98lj ... m.png?dl=0 https://dl.dropbox.com/s/7ugnc9spsg98lj ... m.png?dl=0 Re: Kitchen and appliances damaged by kitchen company 25Aug 12, 2019 9:03 pm IamSAM "Highly Moisture Resistant (HMR) board" is required for cabinetry in kitchen It is HMR board in the carcass and MR MDF for the doors and panels. The materials used are fine. It's the quality of installation that is lacking. Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Re: Kitchen and appliances damaged by kitchen company 27Aug 13, 2019 12:01 am It says it on the CNC stickers. And it looks like it from the pictures. HMR board actually costs me less to buy than standard PB because of the volume that it is made and used in the kitchen industry. It's the default board. Accessible Carpentry & Cabinets accessiblecarpentry@gmail.com accessiblecarpentry.com.au https://www.facebook.com/pages/Accessible-Carpentry-Cabinets/583314911709039 Re: Kitchen and appliances damaged by kitchen company 28Aug 13, 2019 11:56 pm chippy It says it on the CNC stickers. And it looks like it from the pictures. HMR board actually costs me less to buy than standard PB because of the volume that it is made and used in the kitchen industry. It's the default board. Yes I had a closer look and you’re right thank you. Also do you think these defects can be “touched up”? which is what the kitchen company owner has proposed to do? It's hard to comment as the photos area bit dark ( you might need a new 15 - just got one and wow ) Jokes aside, I can see one member that is cracked. I would find a… 2 2292 I recently went through a similar renovation and move scenario when updating our family home. We also swapped some rooms around and tackled a major… 2 10561 No. It's not original. Circa early to mid 90s would be my guess and maybe even as late as early 2000s 1 6956 |