Browse Forums Building A New House Re: overhanging masonary and mortar defects 3May 02, 2019 5:28 pm Check this link for the overhanging brickwork: http://anewhouse.com.au/2014/02/overhanging-brickwork/ The Harder You Try - the Luckier You Get ! Web site http://www.anewhouse.com.au Informative, Amusing, and Opinionated Blog - Over 600 posts on all aspects of building a new house. Re: overhanging masonary and mortar defects 4May 05, 2019 8:44 am MyFirst If the picture for the garage wall is inside garage wall. Then yeah, pretty common for messy mortar... Since brick layer will only treat one side as the "perfection" side. The corner, they can just put flexi joint sealer in it.. Pretty common.. And something very easy for your builder to sort out. Thank you so much for your reply. Re: overhanging masonary and mortar defects 5May 05, 2019 8:50 am bashworth Check this link for the overhanging brickwork: http://anewhouse.com.au/2014/02/overhanging-brickwork/ Thank you so much for sharing this link. I’ll speak to builder to rectify this defects accordingly as there is approx 55 mm overhang that is far more than 15mm. Not sure if they agree to fix it that way or not. Hi All, I engaged a tradie to install concrete retaining wall 600-800mm high over 32 meters in Victoria. Sleepers are 200*75*2000 mm installed over 17 steel posts. I… 0 6919 1 9478 All 3 items listed are defects and are of concern. Please seek qualified independent inspector and/or legal advice for your state. 1 8235 |