Browse Forums Building A New House Re: BAL dropped during build 4Apr 12, 2019 9:28 am Yes we had our BAL reduced but prior to contracts. We had all the quotes and design almost completed though, and the builder contacted us to let us know we had gone from BAL12.5 to BAL Low (from memory?). Anyhow they took out a few $$thousand dollars worth of stuff, but told us they were leaving in roof sarking, brick weep hole covers etc. So I think in general dropping the BAL rating prior to construction is a good thing, but if this happens then obviously your build costs would reduce according to what the builder decides/suggests to remove. So you should be signing a variation for a contract reduction. Sarking is an interesting one though, as most builders here install it as a standard inclusion regardless of BAL ratings. --------------------------------------------------------------------- Check our Homeone build blog here Re: BAL dropped during build 5Apr 12, 2019 1:23 pm Bailey30 Hello, has anyone had a BAL level removed during a build. Ours was reduced to needing no special requirements during the frame stage. We have paid $4400 for the requirements that have not been completed (full roof sarking etc) my builder did not inform us of this and has put roof on minus sarking as it was not a requirement anymore. We have had no notice of this. Can he do this? It’s very clearly in our contract. Sarking is good to have..almost essential. 3 4176 i would suggest nothing is unreasonable for PCI. we did all sorts, including checking the hot water, checking all the GPO's had power, testing that the showers were… 9 98693 |