Browse Forums General Discussion Re: Show us your Walk in Robe... 3Mar 07, 2019 11:33 pm Thanks for that. gives me something to think about. We got our single rail raised to 2mtrs high from the standard so we can move in with something at least then work on a fit out. Re: Show us your Walk in Robe... 4Mar 08, 2019 2:11 am I removed the fitout that the builder quoted (Just a hanging rail and a bank of shelves) and I was refunded about 30% of what it cost me to go to a designer and get it added to my building quote (which included builders 20% mark up) Go onto the Ikea website and use their design tool for a robe, its quite fun and It gives you an idea of what you can get made. Re: Show us your Walk in Robe... 5Mar 08, 2019 6:38 pm Steve4216 I removed the fitout that the builder quoted (Just a hanging rail and a bank of shelves) and I was refunded about 30% of what it cost me to go to a designer and get it added to my building quote (which included builders 20% mark up) Go onto the Ikea website and use their design tool for a robe, its quite fun and It gives you an idea of what you can get made. Cool thanks I will do most towels and sheets will fit easily on 300mm deep shelves and my suggestion allows for a counter surface under the window (about 90cm off the floor would be a… 1 2208 Electrical just got back to me and said the most they can provide is a single power point on the Bedroom 1 side of that wall. After handover, your towel rail installer… 2 1056 Hi , I'm currently going through this now within the Whitehorse council which has a similar set of restrictions. We're having to make compromises with our floor plan due… 3 23656 |