Browse Forums Bathrooms and Laundry Re: Tap washer advice please 11Feb 28, 2019 8:54 am Bit of online digging, looks like these are called "anti-vandal rings" and the tool aradelt was referring to is an "anti-vandal tap head spanner"! https://diy.stackexchange.com/questions ... n-tap-head Interesting suggestion in this thread is to simply open the tap fully and lift the cover flange high enough to get a flat spanner in there to unscrew the spindle. May be worth trying as seems these things can be hard to get off even with the tools. Available at Reece: https://www.reece.com.au/product/ezy-cl ... i%20vandal Re: Tap washer advice please 12Feb 28, 2019 9:39 am Farness Bit of online digging, looks like these are called "anti-vandal rings" and the tool aradelt was referring to is an "anti-vandal tap head spanner"! Good find, and makes this a great thread for future reference. Well done. You can see why I called it a "C-tool" Re: Tap washer advice please 13Feb 28, 2019 9:58 am Also looks as though people have quite a few other names for it when it snaps due to the rings being corroded on! Do you know whether the rings are designed to be removed and put back, or are they one use only? Re: Tap washer advice please 14Feb 28, 2019 10:23 am Farness Do you know whether the rings are designed to be removed and put back, or are they one use only? Sorry, I have no idea as I have never owned this type. I only know about them because I was constantly tightening them when I washed my hands at a past workplace where they were fitted. So much for being anti-vandal that will depend on the kitchen bench depth. you'll have to specify it so it allows for both the tap and the sink 1 7512 7 5203 Brass or 2) Stainless steel made - which Kitchen tap is good for drinking.Brass kitchen taps in Australia contain lead… 0 6795 |